EN
EN
New type 4 ton 8 m telehandler with cummins engine
Home - Products - Telehandler - Telescopic Boom Forklift - New type 4 ton 8 m telehandler with cummins engine
Vehicle Model: VGTH-4008
Maximum Capacity: 4000
Maximum Lifting Height: 8 m
JCB 542-70
4 Ton Telescopic Forklift Truck Telehandler
4.0 ton telescopic forklift
Rated capacity: 4000kgs
Two-stage boom
Engine: DF Cummins National II emission standard
Max. lifting height 7000-8000mm
Fork length 1000mm
Dead weight:9440kgs
Hydraulic mechanical transmission
Four wheel drive(4WD)
Hydraulic power steering Hydraulic braking
Tyre: 16/70-24 (front); 10.00-20-16( rear) Cab with cooling A/C and heater
All lights front, rear, safety, warming light etc.
Introducing our range of agriculture telehandlers. Choose between the Agri, Agri Super and top of the range Agri Xtra model.
Our CommandPlus cab provides farm operators with the ultimate driving experience.
· 12% increase in size to give best-in-class cab volume.
· 50% reduction in cab noise to give a best-in-class 69dBA.
· 14% increase in upward visibility through new seamless one-piece curved glazing, to maintain best-in-class all-round visibility.
CAB with AC and Fan
4WD/4WS
Load Limitor
Self leveing fork
Swing axle
Introduction
The 4008 telehandler features four-wheel drive and rigid suspension. The 4Ton remote control device offers hydraulic mechanical transmission, hydraulic power steering, hydraulic brakes, and rear wheel steering. A two-stage quadrilateral telescopic arm is used as a work unit. Typical forklifts are equipped with forks or booms. In addition, you can offer your customers a range of options, including buckets, hooks, booms, and other attachments. Telescopic forklifts outperform typical forklifts in terms of loading and unloading height and off-road capabilities.
Size | ||
1 | Front wheel center to fork carrier | 1.88m |
2 | Wheelbase | 3m |
3 | Rear wheel center to rear | 1.20m |
4 | Length (with fork) | 6.08m |
5 | Ground clearance | 0.41m |
6 | Wheelbase | 1.95m |
7 | Width | 2.36m |
8 | Overall width (with hydraulic outriggers fully open) | 4.01m |
9 | High | 2.45m |
9 | Fork (L×W×H) | 1200mm×125mm×50mm |
10 | Turning radius (outer wheel) | 3.75m |
11 | Frame leveling | ±8° |
12 | Fork frame tilt angle (Tilt up/Tilt down) | 12°/101° |
Lifting capacity | ||
1 | Capacity | 4Ton |
2 | Max.lifting H | 8m |
3 | Maximum reach | 4.25M |
4 | Bucket Rise | 8000Dyne |
Boom speed | ||
1 | Lifting time | 15.5s |
2 | Load time | 11.6s |
3 | Stretch time | 16.5s |
4 | Retraction time | 11.9s |
5 | Tipping up (filling) | 4s |
6 | Tipping down (unloading) | 4s |
7 | Control | Multifunctional centralized handle, overload protection system |
Capacity | ||
1 | Hydraulic oil | 200L |
2 | Diesel oil | 240L |
Braking method | ||
1 | Braking method | Four-wheel hydraulic negative brake |
2 | Parking brake | Manual negative brake |
Engine | ||
1 | Model | YuCai |
2 | Displacement | 3.621L |
3 | Power | 73.5KW |
4 | Maximum torque | 400N.m |
5 | Spray method | Direct injection |
6 | Cooling system | Water cooling |
7 | Pull rod traction | 8250Dyne |
Transmission | ||
1 | Reverse gear | Electromagnetic |
2 | Number of gears (forward/reverse) | 4/4 |
3 | Maximum exercise speed | 30Km/h |
4 | Steering mode | Four-wheel drive, three steering modes switchable |
Unparalleled productivity courtesy of smart hydraulics, superior performance and efficient design.
· Increased lifting performance throughout the range.
· CommandPlus cab provides operators of all shapes and sizes with a comfortable driving position and extra space, to help work productively with less fatigue over a long working day.
· Regenerative hydraulics harness gravitational forces for quicker boom lowering and retract.
· Hydraulic auxiliary venting releases pressure from inside and outside the cab for quick and safe agricultural attachment changeover.
Our JCB dieselmax engine provides fuel-efficient matching of transmission and hydraulics.
· Legendary efficiency thanks to our proven JCB DieselMAX engine.
· Regenerative hydraulics harness gravitational force to reduce excess revving of the engine.
· ECO mode on the Dual Tech VT models allows the machine to use less engine revs during applications where full engine power is not needed.
Our smart hydraulics package improves cycle time and reduces fuel consumption.
· Boom end damping improves material retention and makes for a smoother work cycle.
· Auto bucket control makes it easier to meter out or fully empty material from your bucket or manure fork via a feature button on the joystick
· New hydraulic auxiliary venting system allows for internal and external pressure release for the front and rear hydraulic auxiliary service.
· New optional Chassis Sway is a hydraulic levelling adjustment at the front axle for precision load placement.
Designed and built to work seamlessly and in harmony across a wide range of agricultural applications.
· We are the only manufacturer of agricultural products to make our complete drivetrain for maximum performance and efficiency with harmonious operation of gearbox and engine.
· Widest range of engine to gearbox options from 109hp to 150hp (81kW to 112kW) and from 4-speed to 6-speed gearboxes all capable of 40kph.
· DualTech VT is the world's only 2-in-1 transmission, giving a seamless transition from hydrostatic to powershift and is now available on both the AGRI Super and AGRI Xtra models.
· Fleximode provides independent engine speed and ground speed control.
None
